Fashion Stoles and Accessories
Diamond Yarn Corporation
Original Copyright Unknown
|ENTIRE DIGITALLY RESTORED LEAFLET IN .pdf FORMAT
AVAILABLE FOR PURCHASE
Half Shell Ribbon Hat, Fold Over Bag, Ribbon Hat, Tri Shape Loop Stole, Cinch Belt, Purse AGlitter, Silk Corde Ascot, Anchor Corde Hat, Coronation Hat, Lacey Stole with Angora Pockets, Juliet Cap and Bag, Straw Pixie Beret and Belt, Polka Dot Cloche and Matching Bag, Three Fold Bag, Mamies Hat, Lacey Poodle Stole, Three Sided Bag, Turned Up Brim Hat, Fringed Angora Triangular Stole, Drawstring Bag, Tippy Hat, Ribon Bolero, Ribbon Cloche, Ribbon and Metallic Bag, Poodle Cape Stole, Crocheted Ribbon Stole, Ribbon Cute Clip On Hat. 24 pages.
Starting at back of hat, chain 13" loosely. Work 2 rows in sc back and forth on this chain. Work should measure 12" in length.
Row 3: Ch 2, turn, 1 dc (double crochet) in same st, * skip 1 st, dc in next st, 2 dc in next st. Repeat from * across row ending with 1 dc. (More)
Make a chain 8" long. Work rows back and forth in dc, dec 1 st at the beg and end of every row for 5". Inc 1 st at the beg and end of every row for 4". Make another piece the same way. Sew both pieces together on 3 sides slip in lining and sew around top. Fold in half and sew on snap fasteners and sapphire pearls as pictured. (More)
Make a chain 3Ā½ in. long. Work in dc, back and forth. Inc. 1 st at one side every other row until piece measures 7 in. Dec 1 st at same side every row until piece measures 14 in. from start. Fasten off. Fit on form and sew on. Sew in ribbon. Arrange rosebuds in circle at each end and sew on. Sew on rhinestones as illustrated. (More)
Make a chain 4Ā½ā long, turn, sc into 2nd ch, sc across, * ch 1, turn, sc into 1st st, sc across. Repeat from * until piece measures 20 inches or desired waist measureĀment. Work buckle on with a sc across row at both ends. (More)
SPECTACLE CASE No. A
Ch. 18. Work in pattern st until piece measures 5". Dec 1 st at beg of each row until 10 sts remain. Break brocade, fasten off. Make another piece in the same manner. Finishing: holding 2 pieces together, and startĀing at point at top where first decrease was made, work 1 row sc around entire case, working through double thickness on both sides and around bottom, and through single thickness around top opening, rounding 2 bottom corners by skipping 1 st as you turn. Scatter pearls on both sides, and either sew them on, or paste them with DuPont Rubber Cement. (More)
Rnd 1: Work 2 sc in each sc around (12 sc).
Rnd 2: Work even.
Rnd 3: *1 sc in next sc, 2 sc in next sc, repeat from * around (18 sc). (More)
Rnd 1: 6 sc in ring. Mark beg. of rnds.
Rnd 2: 2 sc in each sc around.
Rnd 3: *sc in next sc, 2 sc in next sc, repeat from * around. (More)
Using mc, ch 46.
Row 1: sc in 2nd ch from hook, sc in each ch across. Ch 1, turn.
Row 2: sc in each sc across. Ch. 1, turn. Repeat row 2 until piece measures 9Ā¼ā or until long enough to cover frame. (More)
1st rnd: Work 2 sc in each sc (12 sc).
2nd rnd: Work 1 rnd even on 12 sc.
3rd rnd: *1 sc in each of first 2 sc, 2 sc in next sc, repeat from * around (18 sc). (More)
With cc make a ch long enough to measure around your waist, allowing 3" additional for closing. Work 1 sc in each ch, inc 1 st in last st, ch 1, turn. Work even in sc to end of row, ch 1, turn. Attach mc, work in sc to end of row, inc 1 st in last st, ch 1, turn. Work back even in sc to end of row, ch 1, turn. Attach cc, work in sc to end of row, dec 1 st in last st, ch 1, turn. (More)
With mc ch 3, join with a sl st to form a ring. Work 6 sc in ring.
Next rnd: work 2 sc in each sc (12 sc).
Next rnd: *1 sc in next sc, 2 sc in next sc, repeat from * around (18 sc).
Next rnd: *1 sc in each of next 2 sc, 1 sc in next sc, repeat from * around (24 sc). (More)
Make 2 Pieces: With mc ch 54, and work even in sc for 2". Dec 1 st at beg and end of every row 5 times. Work 1" even. Break off mc, attach cc, and continue to work in sc, increasing 1 st at beg and end of every row 5 times. Work 2" even. Break straw, fasten off.
Finishing: Sew sides and bottom of bag. Turn down cuff. Sew zipper in place, and trim bag in same manner as hat. (More)
Make a chain 8" long. Work 5 rows sc, back and forth, *ch 3, turn, work across in dc, ch 1, turn, work 2 rows sc. Repeat from * decreasing 1 st each end every 4th row until piece measures 9". Work in sc for 2", decreasĀing 1 st each end of every row. Dec 2 sts every row at each end for 2" more. Fasten off. Make another piece to match. Sew up both sides of bag. Pull lining through and sew at both ends. Sew on snap fasteners at purse end. Sew on earrings at large opening, and sew bottom together if desired. (More)
Starting at side of hat chain 8, turn, sc in every st across, inc 1 st in last st. * Chain 1, turn, sc in first st, then across row, inc 1 st in last st. Repeat from * until piece measures from 2Ā½ā start. Work even for 7Ā½". Dec 1 st at the beginning of every row for 4 inches. Piece should measure 14" in all. Work 1 row sc around tightly. Fasten off.
Finishing: fit on form and sew in ribbon, sew on earĀrings. (More)
Pattern: Row 1: sc in 2nd ch from hook, sc in each ch across, ch 1, turn.
Row 2: *sc in next st, skip 1 sc, dc in next sc, dc in skipped sc, sc in next st, repeat from * across, ending sc in last st, ch 3, turn.
Row 3: ch 3 (counts as 1 dc), * sc in each of next 2 dc, dc in next sc, repeat from * across, ending dc, ch 1 turn. Repeat rows 2 and 3 for pattern. (More)
Rnd 1: 6 sc in ring.
Rnd 2: 2 sc in each st around.
Rnd 3: *1 sc in first st, 2 sc in next st, repeat from * around.
Rnd 4: *1 sc in first 2 sts, 2 sc in next st, repeat from * around. (More)
Row 1: work around entire piece in dc.
Row 2: sc around entire piece.
Repeat rows 1 and 2 for 7Ā½".
Beading: ch 3, 1 dc in next st, * ch 2, skip 2 sts, dc in next 2 sts, repeat from * around ending sl st in 3rd chain of first ch 3. (More)
Ch. 3 inches, work across in dc inc. 1 st in last st, * ch 3, turn, work across in dc inc. 1 st in last st, repeat from * for 9 rows from start. Work 9 more rows dec. 1 st at the end of every row. Work 3 rows sc around entire piece.
4th row: sc around in back of st work 5 mord rows around in sc. Fasten off. Fit on form and sew. Sew in ribbon for hat band. (More)
Ch 3, join with a sl st to form a ring. Work 6 sc in ring. Work 2 sc in each sc (12 sc).
Next rnd: *1 sc in next sc, 2 sc in next sc, repeat from * around.
Next rnd: * 1 sc in each of next 2 sc, 2 sc in next sc, repeat from * around. Continue in this manner, increasĀing 6 sts on each rnd until piece measures 6" in diameĀter. Work even until piece measures 6" measured straight down from top.
Brim: next rnd: inc 1 st in every 4th st around. (More)
Starting with ribbon make a chain 7" long. Work 1 row of sc along chain. Ch 3, turn, 1 dc in same st, dc across row, tie in brocade, turn, work 1 row sc across loosely. Drop brocade, pick up ribbon on opposite side and work 1 row of dc across. Break off both ribbon and brocade. Make another piece to correspond. Take both pieces and continue working one row brocade in sc, 1 row of ribbon in dc around until piece measures 8" or 21 ribbon strips in all. Slip in frame and sew. Sew up bottom. (More)
Pattern: Row 1: (Brocade) *Ch 5, sc into top of dc of previous row, repeat from * across row, ch 6, turn.
Row 2: (Brocade) sc into 3rd ch of previous row * ch 5, sc into 3rd ch of previous row, repeat from * across row to end. Drop brocade and pick up ribbon.
Row 3: (Ribbon) 1 dc (long loop) in first st, ch 1, in 3rd ch of previous row make * 3 dc as follows. (More)
Round 1: Attach brocade, work a sc in every st around entire chain, working 3 sc at each end.
Round 2: Pick up ribbon, work 3 dc in every other sc around entire piece, with 1 ch in between, (dc are made as follows: *yo, into st draw up a loop, pull through 2 sts. Repeat from * 2 more times, 3 sts on needle, yo, pull through 3 sts.). (More)
Row 1; K 148 sts, turn.
Row 2; Sl 1 st as to p, p 145 sts, turn.
Row 3; Sl 1 st as to p, k 143 sts, turn.
Row 4; Sl 1 st as to p, p 141 sts, turn. Continue working in this manner, working 2 sts less on each row until 2 sts remain, ending with a p row. (More)
Row 1: k across.
Row 2: k1, inc 1 st in next st, k1. Continue in garter st (all k), increasing in 2nd st on every other row until there are 36 sts on needle. Work even for 15".
Next row: * k 1, slip next st on a holder, repeat from * across row. Rib in k 1 p1 on the 18 sts remaining on needle for 2". (More)
With cc cast on 113 sts and work in garter st (all k) for Ā¾". Change to mc and continue in garter st for 2" more (2Ā¾" in all), decreasing 9 sts on last row (104 sts).
Next row: *k11, k 2 tog, repeat from * across row. Purl back even.
Next row: *k10, k2 tog, repeat from * across row. Purl back even. (More)
Rows 1, 2, 3, & 4: K on #9 Needle.
Row 5: using #15 needle *k1, yarn over twice, repeat from * across row.
Row 6: using #9 needle, * slip 1 st as if to purl, drop the 2 yarn overs) 6 times. There are now 6 long stitches on right-hand needle: slip the first 3 long sts over the other 3 long sts put these 6 sts onto left-hand needle then knit them, repeat from * across row. (More)
Fringe: Wind poodle yarn around a 10" cardboard and cut strands at one end (each strand 20" long): tie a 3 strand fringe in each solid stripe of row across. Tie a second row of knots 1" below first row of knots, tying 3 strands of one fringe with 3 strands of the next fringe. Tie third row of knots 1" below 2nd row of knots, tying opposite strands. Tie fringe in same manĀner at other end of stole. Trim edge of fringe. Block stole to 72". (More)
Stole is worked throughout in garter st (k every row). With mc cast on 3 sts k 1 row even. K next 2 rows, increasing 1 st in first and 1 st in next to last st of each row (4 sts increased in 3 rows). Repeat these 3 rows until there are 243 sts on needle. Bind off loosely. With gold Lame, pick up 124 sts along one side of triangle. K 4 rows even. Pick up sts along other side of triangle, and work in same manner. Sew seam at point. With cc cut 8" strands, and draw 2 strands of 4" fringe through each gold st along both sides. (More)
Back: Cast on 60(64-68) sts. Work even in stockinette st for 7"(7Ā½"-7Ā¾"). At the beg of the next 2 rows bind off 3 sts. Work even until armhole measures 7Ā½ā(8"-8Ā¼"). Shoulder: bind off 9(10-10) sts, at the beg of the next 4 rows. Bind off remaining 18(18-22) sts. Left front: cast on 36(38-40) sts. Work even in stockinĀette st for 7"(7Ā½ā-7Ā¾"). At arm edge bind off 6 sts, dec 1 st every other row 4(4-6) times. Work even until armhole measures 5". (More)
Rows 1 and all odd rows: Purl.
Row 2: K 4 (front), k 1 (mark this seam st), k 5 (sleeve), k 1 (mark this seam st), k 11 (back).
Row 4: Inc 1 st at front edge, k 2, inc 1 st in next st, k 1 (seam st), inc 1 st in next st, k 3, inc 1 st in next st, k 1 (seam st), inc 1 st in next st, k 10 (back). Continue in stockinette st, inc 1 st at front edge and each side of each seam st on every k row until 12 sts on front section (not counting seam st), 13 sts on sleeve section and 15 sts on back section (42 sts in all). (More)
Browse the pattern categories to help you find thes you're looking for.